The NEBOSH HSE Certificate in Process Safety Management
Occupational safety counts the injuries that happened; process safety prevents the one that must never happen. This qualification exists because loss of containment is managed or it is suffered — there is no third state.
Format
Classroom · Virtual
Upcoming sessions
Pick a session to applyADMISSIONS OPENThe programme
Catastrophic process accidents rarely begin with recklessness; they begin with loss of containment nobody was managing. The NEBOSH HSE Certificate in Process Safety Management — developed jointly by NEBOSH and Great Britain’s health and safety regulator, the HSE — is the specialist qualification for those who carry safety responsibility in high-hazard process industries. The syllabus works through its four elements as one discipline: process safety leadership, including management of change and worker engagement; management of process risk — permit systems, asset management, contractor control; process safety hazard control, from safe start-up and shutdown to reaction hazards and bulk storage; and fire and explosion protection, dust explosions included. Assessment is a 90-minute online examination of 40 questions, part case-study-based, taken at the end of the taught programme. Cohorts run across the Middle East and Africa — Dubai, Dammam, Doha, Muscat, Lagos — and live online, in English and French.
What you will do
Who attends
- Safety professionals in oil and gas, chemicals, plastics and pharmaceuticals
- Plant and operations managers in process industries
- Process engineers with safety responsibilities
- HSE advisors supporting major hazard sites
Programme agenda
Built for the decisions no textbook prepares you for
I.Element 1 — Process safety leadership
- What process safety is — and why counting injuries never predicted an explosion
- Management of change: the discipline that catches the modification that kills
- Organisational learning, competence and worker engagement as leadership duties
II.Element 2 — Management of process risk
- Establishing process safety management systems that hold under pressure
- Permit-to-work systems, safe shift handover and contractor management
- Asset management, maintenance strategies and performance standards for safety-critical equipment
III.Element 3 — Process safety hazard control
- Safe start-up and shutdown — the operating states where containment is most fragile
- Operating procedures, safe systems of work and utility failures
- Reaction hazards, dangerous substances and bulk storage
IV.Element 4 — Fire & explosion protection
- Fire and explosion hazards — dust explosions included — and their control measures
- Emergency preparedness: the purpose and features of plans that work
- The examination clinic: case-study practice for the 40-question online assessment
Frequently asked
How is the NEBOSH Certificate in Process Safety Management assessed?
Assessment is a 90-minute online examination taken at the end of the taught programme. It comprises 40 questions, part of them case-study-based, and the final teaching block includes an examination clinic with case-study practice — so you sit the assessment having already rehearsed the format under a tutor’s guidance rather than meeting it cold on the day.
What does the NEBOSH process safety syllabus cover?
The syllabus works through four elements as one discipline: process safety leadership, including management of change and worker engagement; management of process risk — permit-to-work systems, asset management and contractor control; process safety hazard control, from safe start-up and shutdown to reaction hazards and bulk storage; and fire and explosion protection, dust explosions included.
Who is the NEBOSH HSE Certificate in Process Safety Management for?
Developed jointly by NEBOSH and Great Britain’s health and safety regulator, the HSE, it is the specialist qualification for those carrying safety responsibility in high-hazard process industries — safety professionals in oil and gas, chemicals, plastics and pharmaceuticals, plant and operations managers, process engineers with safety duties, and HSE advisors supporting major hazard sites.
Where can I take the course, and in which languages?
Cohorts run across the Middle East and Africa — Dubai, Dammam, Doha, Muscat and Lagos — as well as live online, and the programme is delivered in both English and French. Sessions follow a rolling calendar with dates confirmed on request, and like every BIZENIUS programme it is also available in-house, tailored to your institution.
Share this programme
Know the right person for this seat?Nominate a colleague →
In their words
Knowledge transfer, emphasised throughout
“We worked with BIZENIUS for our Fresh Graduates Programme — they are simply amazing. Knowledge transfer and practical learning were emphasised throughout.”
Kuwait Investment Authority
From the Mandate Record
Mandate № 08 · Africa
Building the HSE bench at a global energy explorer
In exploration, the HSE team is the margin for error.
Open the dossier →
Teams from these institutions train with BIZENIUS
Related programmes
NEBOSH International Certificate in Fire Safety
The NEBOSH qualification for those who carry fire safety responsibility — fire and explosion principles, building protection, evacuation and the workplace fire risk assessment that anchors the award.
View programmePermit-to-Work & Control of Work
The system that stands between routine maintenance and catastrophe — permit architecture, isolations, simultaneous operations and live-permit auditing, taught through the incident record that made control of work the industry’s hardest lesson.
View programmeHealth (HSE) and Process Safety Leadership Masterclass
Safety systems do not fail — leadership does. A specialist qualification in HSE and process safety management for leaders who must shift the safety culture itself.
View programmeHealth, Safety & Environment
Take the brochure with you.
One request — the full agenda, the faculty and the next cohort dates, sent personally by the admissions team.